1. 主页
  2. 文档
  3. 工业平板电脑手册
  4. Cortex-A72
  5. 21.5 inch
  6. PPC-A72-215-C

PPC-A72-215-C

User Manual

Release 1.0

Chipsee Products Naming Rules

CS19108R215P-C111
CS Chipsee Product Abbreviate
19 Horizontal Resolution

80 Means 800 Pixel

10 Means 1024 Pixel

12 Means 1280 Pixel

14 Means 1440 Pixel

19 Means 1920 Pixel

108 Vertical Resolution

480 Means 480 Pixel

600 Means 600 Pixel

768 Means 768 Pixel

800 Means 800 Pixel

900 Means 900 Pixel

102 Means 1024 Pixel

108 Means 1080 Pixel

R(T/F) Product based on Rockchip (TI/Freescale) CPU
215 LCD Dimension

050 Means 5.0 Inch

070 Means 7.0 Inch

080 Means 8.0 Inch

097 Means 9.7 Inch

101 Means 10.1 Inch

104 Means 10.4 Inch

120 Means 12.0 Inch

125 Means 12.5 Inch

150 Means 15.0 Inch

156 Means 15.6 Inch

170 Means 17.0 Inch

190 Means 19.0 Inch

215 Means 21.5 Inch

P Means Embedded PC or Panel PC

E Means Embedded PC without Case

P Means Panel PC with Case

C Means Touch Type

R Means Resistive Touch

C Means Capacitive Touch

1 Means LCD Brightness

  • Means Common Brightness
  • Means High Brightness
1 PCB Version

Baseboard PCB Version Number

1 PCB Version

SOM Module PCB Version Number

Hardware Features

Key Features:
CPU Rokchip RK3399, Dual-core Cortex-A72 (1.8GHz), Quad-core Cortex-A53 (1.4GHz)
RAM 4GB DDR3
eMMC 16GB
Storage TF card, supports up to 32GB SDHC
Display 21.5 Inch LCD, 1920*1080 Pixel Resolution
Touch Ten-Point Capacitive Touch
USB 4 x USB 2.0 Host, 1x USB 3.0 Host, 1x Type-C
LAN 1 Channel 1000M LAN
Audio 3.5mm Audio In/Out Connector, 2W Speaker Internal
Buzzer 1
RTC Yes
RS232+RS485 7 Channels (4 x RS485 at most, 1 debug port)
GPIO Optional
WiFi/BT On Board WIFI/BT
HDMI 1 Channel
3G/4G Optional
Power Input 15~36V DC
Current @ 15V 1A max
Power Consumption 15W Typical
Working Temperature 0°C to +70°C
OS Android 7.1, Android 9.0
Dimension 526*322*20.5mm
Weight 5500g

CS19108R215P-C111

Figure 1 Front View

Figure 2 Back View

Power Input Connector

The product uses a wide range power input: DC 15~36V. The total power consumption is normally about 15W. The power input connector is a 3 pin 3.81mm screw terminal connector, as shown in Figure 3.

Table 1 describes how to connect the power supply.

Figure 3 Power Input Connector

Table 1

Power Input Pin Definition:
Pin Number Definition Description
Pin 1 Positive Input Connect to DC Power Positive Terminal
Pin 2 Negative Input Connect to DC Power Negative Terminal
Pin 3 Ground Connect to Power System Ground

ATTENTION:

The system Ground has been connected to Negative Input on the board.

Capacitive Touch

The product uses a ten-point capacitive touch screen.

ATTENTION:

Capacitive touch screens are very sensitive to power noise. Ripple voltage/current from the power adapter can cause the LCD ripples, as well as the malfunction of the capacitive touch. If you use the APK Multi-Touch under Android to test it, you can find the touchpoint float. You can solve this problem by using

  • a high quality power adapter.
  • a battery to provide the power, like a cell phone or tablet PC

If the user power adapter isn’t good enough, make sure Pin 3 is connected to the Ground. This can eliminate the problem totally. You can test it by touching the Ground of the CS19108R125P-C111 with one hand, and the capacitive touch screen with the other hand. 

DB9 Connector

There are six serial ports available with DB9 connector, all configured in RS232 mode by default (COM1 to COM6). You can set COM3 to COM6 in RS485 mode, but if you need any special configuration, please contact us.

Figure 4 DB9 Connector

USB 2.0 Connector

There are four USB 2.0 connectors, as Figure 5 shows. Each can provide 500mA of current.

Figure 5 USB 2.0 Connector

USB 3.0 Connector

The product also features one USB 3.0 connector, as shown in Figure.

Figure 6 USB 3.0 Connector

USB Type-C

As well as one USB Type-C connector, as shown in Figure 7.

Figure 7 USB Type-C Connector

LAN Connector

The product has one channel 1000Mbit Ethernet connector, as shown in Figure 8.

Figure 8 LAN Connector

TF Card

The product has one TF (uSD) card connector, as shown in Figure 9. It supports a TF (uSD) card up to 32GB.

Figure 9 TF Card Connector

ATTENTION:

A TF card does not come with the product.

SIM Card Holder

There is one SIM card holder, as shown in Figure 10. To read the SIM card data, you need a 3G/4G module. The product has a mini-PCIe connector inside that enables a 3G/4G module to be mounted. Otherwise, the holder has no usage.

Figure 10 SIM Card Holder

ATTENTION:

The 3G/4G module is not provided by default, but can be ordered along with the product.

Audio Connector

The CS19108R215P-C111 has one audio connector, as Figure 11 shows, as well as an internal 2W speaker.

Figure 11 Audio Connector

WiFi+BT

The product has one WiFi+BT module, based on the Realtech RTL8723BU, which integrates WiFi and BT. There is a connector on the backside case which can connect external WiFi and BT antenna, as shown in Figure 12.

Figure 12 WiFi+BT Antenna Connector

HDMI Connector

The product has one HDMI connector, as shown in Figure 13. The HDMI output resolution can be configured by software.

Figure 13 HDMI Connector

Power Button

You can see the power button in Figure 14.

Figure 14 Power Button

Measurements and Mounting

Measurements

The measurement of CS19108R215P-C111 is 526*322*20.5mm

Figure 15 Measurements

Mounting Method

This product CS19108R215P-C111 can be mounted by screw holes (Vesa mount) on the back or the side (rear mount). Please make sure the display is not exposed to high pressure when mounting into an enclosure.

Figure 16 Vesa Mounting

How to Get Support

Please feel free to contact us with any questions, queries or suggestions.

If your question is about technical support or troubleshooting for one of our products, we kindly ask you to first check our documentation for a possible solution.

If you cannot find the solution you are looking for then please write to service@chipsee.cn providing all possible details.

这篇文章对您有用吗?