1. 主页
  2. 文档
  3. 工业平板电脑手册
  4. Cortex-A8
  5. 7 inch
  6. PPC/EPC-A8-70-HB-R

PPC/EPC-A8-70-HB-R

User Manual

Release 1.0

Chipsee Products Naming Rules

CS80480T070E-R133/CS80480T070E-R233

CS80480T070P-R133/CS80480T070P-R233

CS Chipsee Product Abbreviate
80 Horizontal Resolution

80 Means 800 Pixel

10 Means 1024 Pixel

12 Means 1280 Pixel

480 Vertical Resolution

480 Means 480 Pixel

600 Means 600 Pixel

768 Means 768 Pixel

800 Means 800 Pixel

T Means Industrial Level product
070 LCD dimension

050 Means 5.0 Inch

070 Means 7.0 Inch

080 Means 8.0 Inch

097 Means 9.7 Inch

101 Means 10.1 Inch

104 Means 10.4 Inch

E Means Embedded PC or Panel PC
E  Means Embedded PC without Case
Means Panel PC with Case
R Means Touch type
R  Means Resistive Touch
Means Capacitive Touch
1 Means LCD Brightness
1  Common brightness
2  High Brightness
3 Means PCB Version
Version Number, Will change with PCB version
3 Means product Version
Version Number, Will change with SOM module version

Hardware Features

Key features:

Sitara Core AM3354ZCZ100
CPU  ARM Cortex A8, 1GHz
RAM 512MB DDR3 (Industrial)
eMMC 4GB (Industrial)
Storage uSD card, supports up to 32GB SDHC
Display 7.0 Inch LCD,800 x 480 Pixel Resolution

Brightness:R133 – 250nit

          R233 – 400nit

Touch Resistive Touch
USB 2 x USB 2.0 Host  

(can be customized to HOST or OTG)

LAN 1 Channel 100M LAN
Audio 3.5mm Audio In/Out Connector
Buzzer 1
RTC  Yes
RS232 2 Channels 
RS485 2 Channels *
CAN 1 Channel *

(drivers available for Linux only)

GPIO 4 Input, 4 Output, 1000V DC Isolated
WiFi Support External USB WiFi, Optional
Power Input 6~42V DC
Current @ 12V 400 mA max
Power Consumption 5W
Working Temperature -20°C to +70°C
OS Android,Linux

Debian,Angstrom

Dimension CS80480T070E:190 x 112 x 28 mm

CS80480T070P:206 x 139 x 33mm

Weight  CS80480T070E:410g

CS80480T070P:830g

* The RS485 and CAN channels may be customized to the following arrangements: 

  • 2 x RS485, 1 x CAN(Default)
  • 1 x RS485, 2 x CAN

CS80480T070E-R133/CS80480T070E-R233

Figure 1 Top View(Android)

Figure 2 Back View

CS80480T070P-R133/CS80480T070P-R233

Figure 1 Top View(Android)

Figure 2 Back View

Power Input Connector

The product CS80480T070E/CS80480T070P use a wide range of power Input: DC 6~42V. And the total power consumption is about 5W normal. The Power Input Connector is 3 Pin 3.81mm Screw Terminal connector as Figure 5 Power Input Connector and Figure 4 Back View. It is labelled as P6 on the PCB. The Character “+” means power Positive input, The Character “” means power Negative input. The Character “G” means system Ground. Table 2 have detailed description about the connector definition.

Figure 5 Power Input Connector

Table 1

Power Input Pin Definition:
Pin Number Definition Description
Pin 1 Positive Input Connect to DC Power Positive Terminal
Pin 2 Negative Input Connect to DC Power Negative Terminal
Pin 3 Ground Connect to Power System Ground

Please note:

The system ground “G” has been connected to power Negative “” on board.

Resistive Touch

Product CS80480T070E/CS80480T070P use resistive touch, As Figure 6 shows.

Figure 6 Capacitive Touch Connector

CAN+RS485+RS232 Connector

The RS232 / RS485 / CAN connector is a 12 Pin 3.81mm Screw Terminal connector. 

It is defined as P16 on the pcb as shown in Figure 4 Back View and Figure 7 RS232 / RS485 / CAN Connector.

Figure 7 RS232 / RS485 / CAN Connector

 As for the definition of every Pin, Please refer to Table 3.This product can customized to inherit two CAN channels. If two CAN channels are needed, please contact us.

RS232 / RS485 / CAN Pin Definition

Table 3

RS232 / RS485 / CAN Pin Definition:
Pin Number Definition Description
Pin 1 GND Isolated Ground Output
Pin 2 CAN_L DCAN0 of CPU,CAN L Signal
Pin 3 CAN_H DCAN0 of CPU,CAN H Signal
Pin 4 A2 UART4 of CPU, RS485 A Signal
Pin 5 B2 UART4 of CPU, RS485 B Signal
Pin 6 A1 UART2 of CPU, RS485 A Signal
Pin 7 B1 UART2 of CPU, RS485 B Signal
Pin 8 TXD2 UART1 of CPU,RS232 TXD Signal
Pin 9 RXD2 UART1 of CPU,RS232 RXD Signal
Pin 10 TXD1 UART0 of CPU, RS232 TXD Signal
Pin 11 RXD1 UART0 of CPU,RS232 RXD Signal
Pin 12 +5V System +5V Power Output, No more than 1A Current output

TheRS485 and CAN channels may be customized by Chipsee to the following arrangements: 

  • 2 x RS485, 1 x CAN(Default)
  • 1 x RS485, 2 x CAN

GPIO Connector Definition

GPIO Connector use 10 PIN 3.81mm Connector,It defined as P17 on the PCB board, As figure 8

Figure 8 GPIO Connector

At the upside of the Connector, there are numbers from” 1” to “10”, this represents the Pin number of the connector. As for the definition of every Pin, please refer to Table 4。

Pay attention, all the isolated GPIO use 5V Logic by default. If the customer provides external isolated power, the GPIO logic can be changed according to customer’s desired power (the “FB15” and “FB16” need to be removed on the PCB)

Table 4

PIN number Definition Description
1 VCC Isolated Power +5V Output
2 GND Isolated Ground
3 OutPut_1 Isolated Output 1
4 OutPut_2 Isolated Output 2
5 OutPut_3 Isolated Output 3
6 OutPut_4 Isolated Output 4
7 InPut_1 Isolated Input 1
8 InPut_2 Isolated Input 2
9 InPut_3 Isolated Input 3
10 InPut_4 Isolated Input 4

USB Connector

The product CS80480T070E/CS80480T070P have 2 USB connector, as Figure 9 shows. These two USB connectors can be customized to Host or Slave. All these two connectors have been defined as HOST by default.

Figure 9 USB connector

Please note:

The OTG Connector P15 (USB0) is defined as HOST by default. If needed defined as Slave (OTG), please Remove two 0603 Package 0 Ohm Resistors R1339 and R121 as Figure 9 shows.

LAN Connector

The product CS80480T070E/CS80480T070P feature one channel 100Mbit Ethernet. The connector can be found on the PCB labelled as P13 as Figure 10 LAN Connector shows.

Figure 10 LAN Connector

uSD Card

As in Figure 11 uSD card connector labelled as P5 on the PCB.The device supports uSD cards up to 32GB.

Figure 11 TF Card (uSD) Connector

Please note: The uSD card Slot is NOT Mounted with any uSD card by default.

Boot Switch

The Device features a boot switch which can be used to change boot sequence. It is defined as SW1 on the PCB as shown in Figure 4 Back View and Figure 12 Boot Switch. The position can either be NAND or uSD. The device will boot from the location selected.

Figure 12 Boot Switch

Audio Connector

As Figure 13 Audio Connector shows, the unit has got one Audio Input (“Line-in”) and one Audio (“Line-out”) output.

Figure 13 Audio Connector

Measurements and Mounting

How to Mount the Embedded PC

The product CS80480T070E/CS80480T070P can be mounted using the 4 screw holes on the PCB as shown in Figure 14. Please make sure the display is not exposed to high pressure when mounting into an enclosure.

Figure 14 CS80480T070E Dimensions

How to Mount the Panel PC

Figure 17 Push the PC into the Panel

Figure 12 Mounting Method

How to Get Support

Chipsee assumes no responsibility for any errors, which may appear in this manual. Furthermore, Chipsee reserves the right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. Chipsee products are not authorized for use as critical components in life support devices or systems.

这篇文章对您有用吗? 1