1. 主页
  2. 文档
  3. 工业平板电脑手册
  4. Cortex-A9
  5. 7 inch
  6. PPC/EPC-A9-70-C

PPC/EPC-A9-70-C

User Manual

Release 1.0

Chipsee Products Naming Rules

CS10600F070E-C131

CS10600F070P-C131

CS Chipsee Product Abbreviate
10 Horizontal Resolution

80 Means 800 Pixel

10 Means 1024 Pixel

12 Means 1280 Pixel

14 Means 1440 Pixel

19 Means 1920 Pixel

600 Vertical Resolution

480 Means 480 Pixel

600 Means 600 Pixel

768 Means 768 Pixel

800 Means 800 Pixel

900 Means 900 Pixel

102 Means 1024 Pixel

108 Means 1080 Pixel

F(T) Product based on Freescale (TI) CPU
070 LCD Dimension

050 Means 5.0 Inch

070 Means 7.0 Inch

080 Means 8.0 Inch

097 Means 9.7 Inch

101 Means 10.1 Inch

104 Means 10.4 Inch

120 Means 12.0 Inch

150 Means 15.0 Inch

170 Means 17.0 Inch

190 Means 19.0 Inch

215 Means 21.5 Inch

E Means Embedded PC or Panel PC

E  Means Embedded PC without Case

P  Means Panel PC with Case

C Means Touch Type

R  Means Resistive Touch

C  Means Capacitive Touch

1 Means LCD Brightness

1  Means Common Brightness

2  Means High Brightness

2 PCB Version

Baseboard PCB Version Number

1 PCB Version

SOM Module PCB Version Number

Hardware Features

Key Features:
CPU iMX6Q,Quad-A9,1GHz
RAM 2GB DDR3
eMMC 8GB
Storage TF card, supports up to 32GB SDHC
Display 7.0 Inch LCD,1024*600 Pixel Resolution

High Brightness:500nit

Touch Capacitive Touch (Five-Point)
USB 3 x USB 2.0 Host,1 USB OTG
LAN 1 Channel 1000M LAN
Audio 3.5mm Audio In/Out Connector, 2W Speaker Internal
Buzzer 1
RTC Yes
RS232 2 Channels
RS485 2 Channels *
CAN 2 Channels
GPIO None
WiFi/BT On Board WiFi/BT
HDMI 1 Channel
SATA II 1 Channel
3G/4G None
Power Input 6~36V DC
Current @ 15V 600 mA max
Power Consumption 6W Typical
Working Temperature -20°C to +70°C
OS Android, Ubuntu, Linux
Dimension CS10600F070E: 190*107.8*27.7mm

CS10600F070P: 206*135*30.1mm

Weight CS10600F070E: 380g

CS10600F070P: 680g

* This product has 5 channels of UART in total. The Bluetooth used one channel UART by default, the default setting is 2*RS232+2*RS485+Bluetooth. The UART can be changed between RS232 and RS485 easily. If you want different RS232 and RS485 setting, please contact us.

CS10600F070E-C131

Figure 1 Top View (Android)

Figure 2 Back View

Power Input Connector

The product CS10600F070E/CS10600F070P uses a wide range power input: DC 6~36V. The total power consumption is about 6W normally. The Power Input Connector is 3 Pin 3.81mm Screw Terminal Connector as Figure 5 shows. The Character “+” means power Positive input, The Character “” means power Negative input. The Character “G” means system Ground. Table 1 has detailed descriptions about the connector definition.

Figure 3 Power Input Connector

Table 1

Power Input Pin Definition:
Pin Number Definition Description
Pin 1 Positive Input Connect to DC Power Positive Terminal
Pin 2 Negative Input Connect to DC Power Negative Terminal
Pin 3 Ground Connect to Power System Ground

ATTENTION:

The system ground “G” has been connected to power negative “-” on board.

CAN+RS485+RS232 Connector

The CAN+RS485+RS232 connector is a 16 Pin 3.81mm Screw Terminal Connector, as Figure 6 shows. As for the definition of every pin, please refer to Table 2.

This product has 5 channels of UART in total, they can be configured as RS232 or RS485 freely. If you need any other setting different to the default setting, please contact us.

Figure 6 CAN+RS485+RS232 Connector

Table 2

RS232 / RS485 / CAN Pin Definition:
Pin Number Definition Description
Pin 16 CAN2_H CPU CAN Channel 2 H signal
Pin 15 CAN2_L CPU CAN Channel 2 L signal
Pin 14 CAN1_H CPU CAN Channel 1 H signal
Pin 13 CAN1_L CPU CAN Channel 1 L signal
Pin 12 RS485_2- CPU UART2, RS485 –(B) signal
Pin 11 RS485_2+ CPU UART2, RS485 +(A) signal
Pin 10 RS485_5- CPU UART5, RS485 –(B) signal
Pin 9 RS485_5+ CPU UART5, RS485 +(A) signal
Pin 8 RS485_4- CPU UART4, RS485 –(B) signal
Pin 7 RS485_4+ CPU UART4, RS485 +(A) signal
Pin 6 RS232_3_RXD CPU UART3, RS232 RXD signal
Pin 5 RS232_3_TXD CPU UART3, RS232 TXD signal
Pin 4 RS232_1_RXD CPU UART1, RS232 RXD signal
Pin 3 RS232_1_TXD CPU UART1, RS232 TXD signal
Pin 2 GND System Ground
Pin 1 +5V System +5V Power Output, No more than 1A Current output.

ATTENTION:

  1. UART2 signal has been used by Bluetooth signal on board. The RS485_2 function has been disabled by default. If customer needs to use RS485_2 function, please contact us, we will disable the Bluetooth function.
  2. All the CAN signal and RS485 signal have not mount on the 120Ohm Matched Resistance.

Capacitive Touch

The product CS10600F070E/CS10600F070P uses ten-point capacitive touch, as Figure 7 shows.

Figure 7 Capacitive Touch Connector

ATTENTION:

Capacitive touch panels are very sensitive to power noise. Ripple voltage/current from the power adapter will cause the LCD ripples, and will also cause the capacitive touch malfunction: If you use the APK Multi-Touch under Android to test, you can find the touch point float. There are several ways to solve this problem:

1)  Use a high quality power adapter. Or use battery to provide the power like cell phone or tablet PC. 

2)  If user power adapter can’t be good enough, there’s another effective method to solve this problem: Make sure the CS12800F101P-C111 power input connector Pin 3 really connect to user “Power System Ground”. This method can eliminate the problem totally. User can also use another method to test this problem: touch the GND of CS12800F101P-C111 by one hand, the other hand operates on the capacitive touch screen. In this case, user’s body acts as the Power System Ground.

USB HOST Connector

The product CS10600F070E/CS10600F070P has three USB connectors as Figure 8 shows.

Figure 8 USB HOST Connector

USB OTG Connector

The product CS10600F070E/CS10600F070P has one USB OTG connector as Figure 9 shows. It works as slave by default. User can connect it to host PC by this connector.

Figure 9 USB OTG Connector

LAN Connector

The product CS10600F070E/CS10600F070P has one channel 1000Mbit Ethernet Connector, as Figure 10 shows.

Figure 10 LAN Connector

TF Card

The product CS10600F070E/CS10600F070P has one TF (uSD) card connector as Figure 11 shows. This device supports TF (uSD) card up to 32GB.

Figure 11 TF Card Connector

ATTENTION:

The TF card slot is NOT mounted with any TF card by default.

Audio Connector

The product CS10600F070E/CS10600F070P has one Audio Input (“Line-in”) and one Audio (“Line-out”) output, as Figure 12 shows. And the product has an internal 2W speaker.

Figure 12 Audio Connector

HDMI Connector

The product CS10600F070E/CS10600F070P has one HDMI connector as Figure 13 shows. The HDMI output resolution can be configured by software.

Figure 13 HDMI Connector

WiFi+BT

The product CS10600F070E/CS10600F070P has one WiFi+BT. It uses Realtech RTL8723 which integrates WiFi and BT, as Figure 14 shows. For CS10600F070P, there is a connector on the backside case which can connect external WiFi/BT Antenna, as Figure 15 shows.

Figure 15 WiFi+BT Antenna

Boot Switch

The product CS10600F070E/CS10600F070P has a boot switch which can be used to change boot sequence, as Figure 16 shows. As for the details of the boot switch, please refer to Table 3.

Figure 16 Boot Switch

Table 3

Boot Config Select:
Mode 1 2 3 4
TF Card 1 0 0 0
eMMC 1 1 0 1
Download 0 1 1 0

Expansion Connector

The product CS10600F070E/CS10600F070P has one Expansion Connector, as Figure 17 shows. This connector is labelled as P21 on the PCB, and it has connected to CPU GPIO/Camera/I2C signals. As for the definition of every Pin, please refer to Table 4.

Figure 17 Expansion Connector

Table 3

Boot Config Select:
Mode 1 2 3 4
TF Card 1 0 0 0
eMMC 1 1 0 1
Download 0 1 1 0

Table 4

Expansion Connector Definition:
PIN  Function CPU PIN PIN Function CPU PIN
1 I2C2_SDA T7 2 I2C2_SCL U5
3 GPIO7_13 P6 4 GPIO7_12 R1
5 CSI0_PIXCLK P1 6 CSI0_HSYNCH P4
7 CSI0_VSYNCH N2 8 CLKO T5
9 CSI0_DAT19 L6 10 CSI0_DAT18 M6
11 CSI0_DAT17 L3 12 CSI0_DAT16 L4
13 CSI0_DAT15 M5 14 CSI0_DAT14 M4
15 CSI0_DAT13 L1 16 CSI0_DAT12 M2
17 VDD_5V0 5.0V电源输出 18 VDD_3V3 3.3V电源输出
19 GND 接地 20 GND 接地
21 GPIO1_29 W20 22 GPIO4_10 W4
23 GPIO1_28 V21 24 GPIO1_30 U20
25 I2C3_SDA D24 26 I2C3_SCL F21
27 GPIO5_2 H19 28 GPIO3_23 D25
29 GPIO3_30 J20 30 GPIO3_31 H21

ATTENTION:

All these signals connect to CPU directly. Please use it carefully, or the CPU will be damaged easily.

Measurements and Mounting

Measurements of CS10600F070E

The measurement of CS10600F070E -C131 is 190*107.8*27.7mm, as Figure 18 shows.

Mounting of CS10600F070E

The product CS10600F070E can be mounted using the 4 screw holes on the PCB as shown in Figure 14.Please make sure the display is not exposed to high pressure when mounting into an enclosure.

Figure 18 Dimension

Measurements of CS10600F070P

The measurement of CS10600F070P -C131 is 206*135*30.1mm.

Mounting of CS10600F070P

This product CS10600F070P can be mounted using the mounting set, as Figure 20 shows. Please make sure the display is not exposed to high pressure when mounting into an enclosure.

Figure 20 Mounting Method

How to Get Support

Chipsee assumes no responsibility for any errors, which may appear in this manual. Furthermore, Chipsee reserves the right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. Chipsee products are not authorized for use as critical components in life support devices or systems.

这篇文章对您有用吗?